|
To avoid electrical shock or property damage, move the power switch to OFF and disconnect power. |
-
Remove the electrical power supplied to the unit.
-
Remove the control panel.
-
Using a crosshead screwdriver, remove the 2 screws, to the front shroud, inside the control area.
-
Using a crosshead screwdriver, remove the 3 screws, to the front shroud, under the control area.
-
Pull front shroud down and hook front shroud on the 2 screws on the front of the frame.
-
Disconnect connector to transformer.
-
Using a crosshead screwdriver, remove the 2 screws securing the transformer and pull transformer from unit.
-
Install new transformer in reverse order.
