Applies to:

Troubleshooting an E-60 AIF Communication Failure

Are you an end user or a technician?

End UserClosed

TechnicianClosed

Open left door. Push the white circuit breakers under the fryer. Does the error code go away?

YesClosed

Continue normal operation.

NoClosed

NoClosed

Are all of the vat's cords plugged in?

YesClosed

Call for service.

NoClosed

Plug all cords in. If error code persists, call for service.

Are all of the vat's cords plugged in? Are you getting this error code on all vats or one vat?

Cords are plugged in on all vatsClosed

Cords are NOT plugged in on all vats.Closed

I'm only getting the error code on one vat.Closed

Plug all cords in. Does the error code go away?

YesClosed

Continue normal operation.

NoClosed

Are you getting voltage to your AIF board?

YesClosed

NoClosed

Are you getting voltage to your AIF transformer and back?

YesClosed

I'm getting voltage to the transformer but not back.Closed

No voltage to transformerClosed

Are you getting voltage to your circuit breakers?

YesClosed

NoClosed

Replace AIF Board. See Replacing the Express Filter PC Board.

Replace AIF transformer. See Replacing the Transformers.

Replace circuit breaker. See Resetting, Checking and Replacing the Breaker.

Replace power switch. See Replacing the Main Power Switch.

Check harness between AIF board and control board with error code.

Related Content

Replacing the Express Filter PC Board

Replacing the Main Power Switch

Replacing the Control Panel and Menu Card

Resetting, Checking and Replacing the Breaker

Replacing the EEE 153 and 154 Time Delay Relays

Smart Touch Software Installation Instructions

Wendy’s Autonomous Power Switching Circuit Field By-Pass

Troubleshooting Blank Display

Replacing the JIB Pump

Replacing the Flange Mount Filter Pump and Motor

Replacing the Solenoid Valves

Cleaning the Oil Channel

Replacing the Filter Motor Relay

Replacing the Filter Pan Switch

Replacing the Filter Beacon

Replacing the Oil Level Probes

Replacing the Drain Rod Microswitch

Adjusting the Drain Valve Actuator

Troubleshooting the Check Pan Message on Evolution Elite Fryers

Manually Cycling the Solenoid