Inspecting the Filter Pan Components

Some locations may choose to do this procedure on a more frequent basis (i.e., quarterly, semi-annually, or other frequency).

Only perform this procedure when the unit is cool or severe burns may result.

Ensure the filter pan components are undamaged and working within specification by doing the following:

1. Remove the filter pan and disassemble.

   

2. Verify the filter screen, two o-rings (1), and both filter clips (2) are in place and assembled correctly. If any of these parts are missing or damaged, replace them.

   

3. Verify the standpipe and three o-rings are assembled correctly and not missing or damaged.

   

4. Verify the crumb basket and lid are not missing or damaged and if any components are missing or damage, replace them.

5. Continue to the next inspection or reinstall components as applicable.