Replacing Casters

Procedure

Casters on the fryer cannot be adjusted. Replace any damaged or broken casters.

1. Discard oil from the fryer.

2. Use two floor jacks by positioning them near casters, under the frame at point A. Both jacks must be positioned near casters on the same side of the fryer. For example lift both the front casters off of the ground if replacing a front caster.

3. Block the casters on the opposite side of the fryer with small wheel chocks.

4. Raise fryer approximately 2.5" (63mm).

5. Use an adjustable wrench at point B to remove the existing caster.

6. Install the new caster in reverse order.