Replacing the Flip Door
Required tools
spindle lube
|
94182 Door Assy. w/cams |
94184 Door Assy. w/extrusion |
|
|
|
94183 Door Assy. w/cams |
94185 Door Assy. w/extrusion |
|
NOTICE - |
Once flip door is out of frame, hold cam tightly and slowly release tension on cam. The cam secures a high-tension spring and rod that will move rapidly away from extrusion if suddenly released. |
-
Using door latch, open door assembly. Using both hands, pull back on cam on one end of flip door hinge.
- While pressing cam in, swing flip door out of frame.
If replacing flip door assemblies with cams (part nos. 94182 & 94183) continue onto Step 4.
-
When replacing the flip door with extrusion MINUS the cams (part nos. 94184 & 94185) remove the spring and rod from the old door and insert into new door assembly.
NOTICE -
Ensure the cams are on the correct end of extrusion. They are marked "L" for left and "R" for right. Doors will not stay up if reversed.
-
Locate tube of spindle lube (part no. 12124) supplied with doors and place a small amount of lube on each cam.
Continue to place spindle lube on ALL flip door cams in store. This will significantly increase the life of the cams.
Related Content
Reference
