Changing the Volume

Henny Penny Three Lane Timer has a range from 1-10 of volume.

1. Press and hold the timer buttons next to the left display and right display for approximately two (2) seconds.

   

2. The left display will read “PARM” and will light green. - The middle display will read “TEST” and light green. - The right display will read “BACK” and light red.

   

3. Press the left timer button next to the display that reads “PARM” circled.

4. The left display will read “SPKR” and will light green. - The middle display will read “IMG” and light green. - The right display will read “BACK” and light red.

5. Press the timer button next to the left display that reads “SPKR” circled.

   

6. The left display will read “SPKR” and light green. - The middle display will read “VOL /\” and light green. - The right display will read “ \/” with a numerical value and light red.

7. To adjust the volume up, press the timer button next to the middle display that reads “VOL /\”. The numerical value will change in the right display. To adjust the volume down, press the timer button next to the right display that reads “ number \/”. The numerical value will decrease.

8. Once desired volume is chosen, press the timer button next to the left display that reads “SPKR”.

9. Press the timer button two (2) times to exit menu and return to idle mode.