Applies to:

Stats Mode

This mode allows a technician to view advanced information on the operation of the fryer and controls.

Press and hold the program button for 5 seconds until “LEVEL 2”, followed by, “SP PROG” and “ENTER CODE” show in the display.
Press the program button 5 times and “STATS” and “ENTER CODE” flash in the left display.
Enter code 1, 1, 2, 2, 1, 1, 2, 2 (first 2 product buttons).
“ST-1 STATS LAST RESET ON...” flashes in the left display and the date shows in the right display. Use the up and down arrow buttons to select the steps.

If a bad code is entered, a tone sounds and “BAD CODE” shows on the display. Wait a few seconds, the controls revert back to the cook mode, and repeat the above steps.

Press and hold the program button at anytime to return to normal operation.

Program Code	Description
ST-1	Stats Last Reset Date
ST-2	Fryer Total Running Hours
ST-3	Left Vat Melt Cycle Hours
ST-4	Left Vat Cook Cycle Hours
ST-5	Left Vat Idle Hours
ST-6	Right Vat Melt Cycle Hours
ST-7	Right Vat Cook Cycle Hours
ST-8	Right Vat Idle Hours
ST-9	Power-Ups Count
ST-10	Error Counts
ST-11	Left Vat Heat On Hours
ST-12	Right Vat Heat On Hours
ST-13	Highest Left Vat Oil Temperature
ST-14	Highest Right Vat Oil Temperature
ST-15	Highest CPU Temperature
ST-16	System RAM Fade Count
ST-17	Cook RAM Fade Count
ST-18	Product RAM Fade Count
ST-19	Stat RAM Fade Count
ST-20	RAM Data Error Count
ST-21	Data Total Loss Count
ST-22	User Initialization Count
ST-23	Automatic Initialization Count
ST-24	Cooks Count per Product
ST-25	Cook Cycle Stop Counts
ST-25A	Number Of Stops In First 30 Seconds
ST-25B	0
ST-25C	0
ST-25D	Complete Cook Cycles Counted
ST-26	Reset All Stats