Applies to:

Loading Setpoints for Cracker Barrel

This is the procedure to enable the Homestyle Menu with setpoints for Cracker Barrel.

Per customer request, a pre-loaded USB drive may be shipped with the unit.

Setpoint xml can be found on the extranet.

If a preloaded USB is not provided, download the .xml setpoint file onto a USB drive.
Insert the USB drive into the external USB port on the front of the unit.
Press and hold the Main Menu button until "MAIN" displays.
Select 3. USB/DATA from the Main Menu.
Select 2. Setpoints from the USB/DATA menu.
Select GET FROM USB from the setpoint menu. A password prompt displays.
Enter 123. Setpoint files display.
Press the up and down arrows to locate the file to be loaded.
Press the right-arrow button to select the desired file. LOAD? displays.
Select YES. The file loads. -DONE- displays when complete.
Press the right-arrow button. A menu displays.
Select 3. REMOVE USB. Ok To Remove displays.
Remove the USB drive, and then press X to exit back to normal operation.