Replacing the AIF Board (Double Well)

To avoid electrical shock or property damage, move the power switch to OFF and disconnect power.

Remove electrical power supplied to fryer.
Remove the control panel.
Remove the right side panel by removing the 4 self-drilling screws.
Label and disconnect the connectors leading to the AIF board.
Release the wires from the wire clip located on the shroud and move wires aside for clearance when removing the AIF board.
Use a cross-tip head screwdriver to remove the top screw securing the AIF bracket.
Slide the AIF bracket with the AIF board still attached out of the side of the unit.
Use a nutdriver to remove all the nuts securing the AIF board to the bracket. Set aside these nuts.
Install the new AIF board.