Special Programming

Press √ button and “SP-1 ZONE” display on the left . Use the left and right arrow buttons to set the default set-points to USA specifications or non-USA specifications.

Press the Down arrow button and “SP-2 DO SYSTEM INIT” scrolls in left display. To reset the controls to factory default settings, press and hold √ button and controls count down “IN 3”, “IN 2”, “IN 1”. Once “-INIT-” & *DONE* displays the controls are reset to factory defaults.

Press the Down arrow button button and “SP-3 2ND LANGUAGE” scrolls in left display. Use the left and right arrow buttons to set to: ENGLISH; FRANCAIS; CAN FREN; ESPANOL; PORTUG; DEUTSHE; SVENSKA; РУССКИИ or -NONE-.

By setting a second language in the controls, 2 languages can now be easlily chosen by pressing button twice during normal operation.

One language shows in left display and a second language shows in the right display. Pressing the √ button selects the language in the displays.

Press the Down arrow button button; “SP-4” and “2ND VOLUME” flash on the left display. Press the left or right arrow buttons to select the desired 2nd volume.

By setting a 2nd volume in controls, 2 volumes can now be easlily chosen by pressing button 3 times during normal operation.

One volume setting shows in the left display (NONE to 10; 10 being the loudest) and the second volume shows in the right display. To select the volume, press the √ button under the desired volume .

Press Down arrow button button and “SP-5 QUICK CONFIG” displays. Use the left and right arrow buttons to change the menu selection in the controls to: CHKN+FISH; FF/HBR;CHKN or EMPTY.

Press Down arrow button button and “SP-6 POLISH” displays on the left. Use product buttons to change polish time, from 5 minutes to a maximum of 10 minutes.

Press Down arrow button button and “SP-7 DRAIN VALVE” scrolls in left display. Use the left and right arrow buttons to change right display to show “NORMAL” or “MANUAL”. NORMAL means the drain valves are controlled electronically and MANUAL means the drain valves must be opened by hand.

Press the Down arrow button button and “SP-8 S/N √ EDIT” displays on the left. Press the right √ button to enter the unit’s serial number in the controls, using the product buttons.

“STD” and “CUST” displays on the right. Press the √ button under the “STD” and the first 2 letters of the serial number is the standard equipment code, press the X button and a custom equipment code can be entered. THIS SERIAL NUMBER SHOULD MATCH THE SERIAL NUMBER ON THE DATA PLATE,ON THE DOOR.

Press the Down arrow button button and “SP-9 DECAL LAYOUT?” scrolls in the left display. The words in the right displays should match the arrow type above the Temperature button and Info button.

EX: If the control decal shows the down and up arrow buttons, the right displays should show DOWN-UP. If the displays show UP-DOWN, use the left and right arrow buttons to change the displays to DOWN-UP.

Press the Down arrow button button and “SP-11 MELT CYCLE SELECT” scrolls in the left display. Unless solid oil is being used in the vats the right display should show “1.LIQUID”. If solid oil is used, the unit MUST BE equipped to handle solid oil. Use the left and right arrow buttons to change the right display to “2.SOLID”.

Press the Down arrow button; “SP-12 ‘CHANGE PAD’ REMINDER” displays. Use product buttons to change the time between changing filter pad reminders.

For example, if “25 HRS” is programmed in the right display, every 25 hours the display shows “CHANGE PAD” as a reminder to the operator that the filter pad needs changed.

Press the Down arrow button and “SP-13 PAN OUT = CHANGED PAD” scrolls in the left display. Use the product buttons to program the amount of time the drain pan is pulled-out from under the fryer before the controls reset the change pad reminder. This is the amount of time it should take to change filter pad. Range is 15 to 255 seconds.

For example, if “120 SEC” is programmed in the right display, when the filter pan is out from under the fryer for at least 120 seconds, the controls restarts counting for the change pad reminder.

Press the Down arrow button and “SP-14 AUTO-FILL ENABLED?” scrolls in the left display. Use the left and right arrow buttons to set the right display to “YES” or “NO”. This should always be set to “YES”, unless a hardware failure causes a problem, such as a JIB pump or Add Oil valve failure.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

For more information, contact Henny Penny service at +1-937-456-8405 or +1-800-417-8405.

In SP-58, use the ◄ or ► to change “NO” to “YES”.

In SP-59, “0 Yes or No” (if Select YES- 0 Button on Controller will activate ESM/IDLE when the button is pressed)

Energy Saver Mode Features:

• Available for gas and electric LOV fryers

• Vat will go into Energy Saver Mode (ESM) after 30 minutes of not being used

• ESM can be ended with one button; vat will heat up in a few minute

• Each vat controlled separately • Vat activity tracked and monitored

• ESM can be triggered automatically when individual vats not in use

• Manual option allows crew to put vat in ESM with one button push

• Timing for ESM can be customized as can idle temperature

• Control panel displays “Idle” when in Energy Saver Mode

• Quick “Wake Up” Mode brings the fryer back to cooking temperature quickly

SP-60 Auto Idle Minutes (Default Setting is at 30 minutes, you can set this to any time limit desired) 8. SP-61 Idle Mode Set Point (Default Setting is at 200 F and recommended temperature for fryer, fryer will drop temperature down to set point temperature when vat is idle).

Idle Mode Set Point (Default Setting is at 200 F and recommended temperature for fryer, fryer will drop temperature down to set point temperature when vat is idle).