Replacing the Drain Valve

The drain valve is found under the vat at the back of the fryer. To open the drain valve, pull the red knob at the front of the fryer.

To avoid electrical shock or property damage, move the power switch to OFF and disconnect power.

Burn Risk Do not attempt this procedure while the fryer is in use or the vat is hot. Severe burns may result. Only perform this procedure when the fryer is cool and disconnected from the power source.

Burn Risk Using PPE, remove hot oil from fryer before performing procedure or personal injury may occur.

1. Drain the oil from the vat into the filter pan.

2. Remove the right side panel of the fryer.

3. Remove the two cotter pins from the drain valve fitting and drain rod.

4. Pull the extension from the drain valve and let rod hang.

5. Unscrew the drain shield from the valve.

6. Unscrew the drain valve from the vat.

7. Replace with new drain valve in reverse order.