The drain valve opens when the drain valve handle is pulled out and drains the oil out of the vat.
|
To avoid electrical shock or property damage, move the power switch to OFF and disconnect power. |
-
Using a 3/8” socket, remove the nuts securing the drain switch bracket, and pull the bracket from the studs.
-
Remove the nut securing the drain handle and pull the handle from the drain valve.
-
Using a large adjustable wrench, unscrew the drain valve and extension from the unit.
-
Replace the drain valve and extension.
-
Replace the drain switch bracket.
-
Adjust the microswitch to be no more than 1/8 inch (3 mm) from the shaft of the drain valve.
Listen for click of switch while pulling drain valve handle.
