Applies to:

ALL CUSTOMERS

Direct-Connect Retrofit Instructions (For use on fryers after SN: 290-BE0401001 & 591- LG014JC)

Adjustable wrench

Crosstip head screwdriver

Electric drill with crosstip bit

Tape measure

Pipe thread sealant

Kit number

14638

Estimated Time

1 Hour

  1. Use a crosstip head screwdriver to remove left side panel and rear panel from fryer.

  2. Use an adjustable wrench to loosen the side and front fittings to the pump return line.

  3. Fasten the short and long tube assemblies onto the diverter valve assembly.

  4. Tighten the nuts with the adjustable wrench.

  5. Install the diverter assembly onto the fryer.

  6. Tighten the nuts with the adjustable wrench.

  7. Loosen the filter motor mounting bolts, if necessary.

  8. Fasten the direct-connect tube assembly onto elbow of diverter valve assembly.

  9. Tighten with the adjustable wrench.

  10. Use the self-drilling screws supplied in the kit to mount the direct-connect tube assembly bracket to the rear frame

  11. Fasten the elbow and flexible gas line fitting onto the direct-connect tube assembly.

  12. Apply pipe sealant to threads of hose-side of elbow.

  13. Tighten with the adjustable wrench.

  14. Reinstall the side and rear panels, and fryer is now ready for use.

Related Content

Testing and Replacing the Power/Pump Switch

Replacing the Drain Microswitch

Replacing the Drain Valve and Extension

Installing the Pump Seal Kit

Filter Rinse Hose Retrofit Instructions

Electric Power Cord Routing and Attachment Installation Instructions

Unpacking Instructions

PFE 590 and 591 Electronic Control Retrofit Computron 7000 to New Electronic Controls

PFE 592 (FAST Controls) to 590 (Henny Penny Controls) Retrofit Instructions

Retrofit Control Instructions 290-590 KFC to 291-591 GM

Retrofit 292-592 Fast KFC to 291-591 Controls Instructions

PFE 590 and 591 Installing Optional Crumb Basket

Rear Cover Removal Instructions

Label Application and Location for the 8 Head Fryer

FM08-481 8 Head Replacing the Control

FM08-502 8 Head Replacing KFC Control

Testing and Replacing the Power/Pump Switch

Replacing the Drain Microswitch

Replacing the Drain Valve and Extension

Reference

Specifications

Error Codes

Wiring Diagrams

PFE 590 and 592 Inspection and Planned Maintenance

PFE 590 and 592 KFC Annual Inspection Certification

Specifications

PFE 591 Inspection and Planned Maintenance