Installing or Replacing Fluorescent Lamps

This lamp has been designed to resist breakage and must be replaced with Promolux part #12521C (Henny Penny part #BL01-019) in order to maintain compliance with NSF standards. Use max 21 watt, T5 fluorescent lamp.

Only perform this procedure when the unit is cool or severe burns may result.

To avoid electrical shock or property damage, move the power switch to OFF and disconnect power.

Ensure the electrical power is off and allow unit to cool.
Using a crosshead screwdriver, remove the screws securing the lamp retainers and remove the retainers.
If replacing a faulty lamp, carefully rotate lamp out of sockets.
Install new lamp by carefully rotating the lamp into the socket and snapping them into place. Repeat for each shelf.
Reinstall lamp retainers, restore power and unit is ready for operation.