PFG 600 C7000 One Button Programming

The one button programming feature is a simple way for the operator to place Henny Pennys cooking parameters into the control’s memory. These programmed cooking cycles are matched with the menu item cards sent with each unit. To achieve this one button programming, follow these steps:

1. Turn the COOK/PROGRAM keyswitch to the PROGRAM position.

2. Depress the TIMER switch. This will put you into the Special Program Mode. The display will read “SP”.

3. Using the SELECT PRODUCT switch, select the number 7 product (this will be the top right menu item). The display will read as follows:

Digit 1: Blank’ -’ When the switch under the digit is depressed it will read INIT for one second then ‘erase all memory.

Digit 2: Blank - When the switch under the digit is depressed it will enter all Henny Penny cooking parameters. Display will read INIT for one second, then HP.

Digit 3: Display will read either F for Fahrenheit degrees or C for Celcius degrees. By depressing the switch under the digit, it will toggle from F to C.

Digit ‘4: Display will read either E for electric or 0 for gas units. By depressing the switch under the digit ‘it will toggle from E to 0.