PFG 600 C7000 Programming

Move the keyswitch to the PROGRAM position.
Depress the SELECT PRODUCT switch to the desired product. The red indicator light will illuminate beside the particular product you are programming.
By depressing the SELECT FUNCTION switch, you pick the function to program such as time, temperature, etc. The function you are in will be flashing. Program TIME first.
Depress the change switches beneath the digital display until the desired time is displayed. Example: 11 minutes - 11:00.
Continue this procedure until you have programmed TIME, TEMPERATURE, ALARM, and PRESSURE.

An alarm cannot be programmed on the first interval of any product. Also, your programming temperature range is from 170° to 390°F.
By depressing the SELECT TIME switch you can change intervals within that function. You may program up to 10 intervals per function.
Load compensation, load anticipation, proportional control, and filter cycle can only be programmed in interval one. When changing to interval two, only time, temperature, alarm, and pressure will illuminate in the function display.