C8000 Setting the Clock

NOTE: Upon initial start-up or after control board replacement, if CLOCK SET automatically displays, start at CS-1.

Logging into Clock Set Mode

1. Press and hold the Program button for 5 seconds until LEVEL 2 displays.

2. Press the program button and CLOCK SET and ENTER CODE displays.

3. Press Product button 1, Product button 2, Product button 3, CS-1, SET, MONTH displays.

CS-1 Setting the Month

The month setting blinks and may be set from 1 (January) to 12 (December). Set the Calendar Month

by doing the following:

1. Press the up or down arrows to change the month.

2. Press Program button, CS-2, SET and DATE displays. The date flashes.

CS-2 Setting the Date

The date setting blinks and may be set from 1 to 30 or 1 to 31 as appropriate. If the month is presently

set to 2 (February), the date is programmable from 1 to 28 or 1 to 29 depending on whether or not the

indicated year is a leap year.

NOTE: If you cannot set the date to February 29th you may need to step ahead and set the year first,

so that the controller sees the present year is a leap year.

Set the calendar date (day of the month) value by doing the following:

1. Press the up and down arrow buttons to change the date.

2. Press the program button, CS-3, SET and YEAR displays. The year flashes.

CS-3 Setting the Year

The year setting blinks and may be set from 2000 to 2099. Set the year value by doing the following:

1. Press the up and down arrow buttons to change the year.

2. Press the program button, CS-4, SET and HOUR displays. The hour and AM or PM flashes.

CS-4 Setting the Hour

In AM/PM mode, the hours and the AM/PM indicator both blink. The hours may be set from 12:xx AM to

11:xx PM. Set the time of day clock hours value:

1. Press the up and down arrow buttons to change the hour, either AM/PM setting.

2. Press the program button, CS-5, SET and MINUTE displays. The minutes flash.

In 24-hour mode a special "24-HR" reminder is displayed. The hours alone blink (there is no AM/PM indicator). The hours value can be set from 0: xx to 23: xx. Set the hours value using step 1 and then continue at step 2.

CS-5 Setting the Minute

In either mode (AM/PM or 24-hour mode) the minutes value blinks and may be set from xx:00 to

xx:59. Set the time of day clock minutes value by doing the following:

1. Press the up and down arrow buttons to change the minutes.

2. Press the program button, CS-6, CLOCK MODE, and 1. AM/ PM displays:

   • 1. AM/PM is 12 hour time.

   • 2. 24-HR is 24 hour time.

CS-6 Setting the Clock Mode (Time Format)

This setting controls how time-of-day values are displayed:

• Selecting 1. AM/PM selects a traditional US display format: 12:34 A or 11:59 P, etc. In AM/PM format, an A indicates AM - a time before noon. P indicates PM - a time after noon. The first hour after midnight: 12:00 A to 12:59 A. Then next 11 hours are 1:00 A to 11:59 A. The first hour after noon: 12:00 P to 12:59 P. The remaining hours are 1:00 P to 11:59 P.

• Selecting 2. 24-HR selects a 24-hour clock display, where hours range from 0:xx to 23:xx, in linear fashion starting at midnight.

1. Press the up and down arrow buttons to change from either 12 or 24.

2. Press the program button, CS-7, DAYLIGHT SAVINGS ADJ, and 2.US displays.

CS-7 Adjusting for Daylight Savings Time

This setting enables automatic Daylight Saving Time adjustment of the on board real time clock.

NOTE: If the fryer is not plugged in or running at the time of a DST transition, the adjustment occurs automatically the next time it is powered up.

1. OFF: No automatic adjustments for Daylight Saving Time.

2. US: Automatically applies United States Daylight Savings Time adjustment. DST activated on the first Sunday in April. DST de-activated on the last Sunday in October.

3. EURO: Automatically applies European (CE) Daylight Saving Time adjustment. DST activated on the last Sunday in March. DST de-activated on the last Sunday in October.

1. Press the up and down arrow buttons to change to the following:

   • 1. OFF: No automatic adjustments for Daylight Savings Time.

   • 2. US: Automatically applies United States Daylight Savings Time adjustment:

     – DST activated on the second Sunday in March.

     – DST deactivated on the first Sunday in November.

   • 3. EURO: Automatically applies European (CE) Daylight Saving Time adjustment.

     – DST activated on the last Sunday in March.

     – DST deactivated on the last Sunday in October.

2. Press the program button and CS-8, BEGIN NEW DAY and 3:00 AM display.

CS-8 Setting Begin New Day

This setting indicates the time of day that the controller starts accumulating statistics for a new day. The CS-8 value can be set from 12:00 AM (midnight) to 8:00 AM, in half-hour increments (12:00 AM, 12:30 AM, 1:00 AM, 1:30 AM, etc.). Note that this setting only affects how the "Daily Stats" values are tallied, and has no other affect on fryer operation.

If set to 3:00 AM, for example, then late night cook cycles and filter operations from midnight to 3:00 AM are accumulated with the previous day's statistics.

For example, assume a store closes at 2:00 AM. In this case, they would probably want the CS-8 value set to 3:00 AM, in order to catch filter operations that may be performed after the store closes. Late-night operation from midnight to 3:00 AM on Tuesday will then be accumulated into the Monday statistics totals. When the store opens again at 8:00 AM on Tuesday, it will start the day with no cook cycles or filters yet.

1. Press the up and down arrow buttons to change the time the new day starts. Clock Set is now complete.

2. Press the program button and hold to exit.