Replacing the Infinite Switch
Required tools
crosshead screwdriver
|
To avoid electrical shock or property damage, move the power switch to OFF and disconnect power. |
-
Remove electrical power supplied to the cabinet.
-
Remove the control side end panel.
-
Remove the electrical wires from the switch.
-
Remove the switch knob by pulling it off.
-
Remove the nut from the control panel side of the switch and remove the switch.
NOTICE -
Do not connect a “hot” wire to termimal “P” on the infinite switch, or damage to the switch will result.
-
Install a new switch in reverse order.
-
Replace the end panel.
-
Turn on the power supply at the breaker box.
