Replacing the Light Socket

To avoid electrical shock or property damage, move the power switch to OFF and disconnect power.

Light bulbs and glass may be hot. Severe burns could result.

Do Not attempt to access the bulb from the operator’s side of the unit. The installer cannot easily see the bulb and socket or the adjacent radiant heaters, increasing the potential shock or burn hazard.

Remove electrical power supplied to the cabinet.
Remove the glass panel and the light bulb.
Remove the four screws located at the bottom of the light box.
The light box can be pulled down by slightly spreading the ceiling panel sides.
Remove the electrical wires from the socket.
Remove the two screws holding the socket to the light box.
Install a new light socket in reverse order.
Turn on the power supply at the breaker box.