Special Programming

Entering Special Programming

The special programming modes are entered by way of a special sequence of keys and are intended to be infrequently used for service or factory preset functions. The modes are numbered according to the cycle that is selected to enter them.

1. Enter the password keystroke sequence for programming mode.

   1. Press the square under the far right digit of the display.

   2. Press the “Select Time” button.

   3. Press the square under the far left digit of the display.

   4. Press the “Exit Cool” button.

2. Press the EXIT COOL button.

   Display will read “SP”

3. Select the desired special function by depressing either cycle button 6 or 7.

4. Perform the desired operation.

5. Press the EXIT FILL button to exit the special program mode. Unit will return to stand-by cook mode.

To exit program mode, press EXIT FILL button.

Proportional control regulates vat temperature by pulsing the heat on and off until it reaches setpoint temperature. This allows better temperature accuracy when dropping product. Proportional control for KFC parameters is set at 10 degrees.

Load compensation adjusts cooking times to compensate for differences in the cooking process such as load size. The control is continuously comparing the pot temperature to the setpoint temperature. If the vat temperature is above the setpoint, the control will shorten the cook time. If the vat temperature is below the setpoint, the control will lengthen the cook time. Load compensation for KFC parameters is set at 0.