Applies to:
Replacing the AIF PC Board
This electronic board controls the Automatic Intermittant Filtering process.
![]() |
To avoid electrical shock or property damage, move the power switch to OFF and disconnect power. |
-
Pull-down center control panel (right panel on two vat units).
-
Tag and pull connectors from PC board, located behind control panel.
-
Using a 5/16 inch socket, remove the six nuts securing the board and remove it from the fryer.
-
Install in reverse order.
Related Content
Replacing the Filter Motor Relay
Replacing the Filter Pan Switch
Replacing the Filter and JIB Lights
Replacing the Oil Level Probes
Adjusting the Drain Valve Actuator
Troubleshooting a Leaking Drain Valve
Troubleshooting an E-82 Error Code
LVE 20X Troubleshooting the Oil Not Pumping Error Code
Reference