Lubricating the Lid

To extend the life of lid components, lubricate the ball seat and spindle, following the steps below.

1. Close and latch the lid, and turn the spindle counterclockwise until it stops.

   

2. Press down on the front of the cross bar, pull out the release pin, lift the latch, and raise the cross bar.

   

3. Using spindle lube (Part No. 12124), lubricate the ball seat in the center of the lid cover.

   

4. Turn spindle clockwise until it stops and then lubricate the threads on the spindle using the spindle lube.

5. Remove the hinge spring cover and generously lubricate the coils of the hinge spring.

6. Turn the spindle clockwise until it stops, line up the lid cover with the cross bar, pull the release pin out, and firmly press the cross bar back into place.