Replacing the Blower Motor
Required tools
crosshead screwdriver
|
To avoid electrical shock or property damage, disconnect power before installing or servicing equipment. A qualified technician must perform the service procedures. |
-
Remove module top.
-
Unplug wires from blower motor.
-
Using a crosshead screwdriver, remove the screws securing the blower bracket to the module.
-
Pull bracket from module. Loosen set screw on fan blade and pull blade from blower.
-
Remove the 3 nuts securing the blower to the bracket and remove blower motor.
-
Install new blower in reverse order, and unit is now ready for use.
