Replacing the Vent Motor Microswitch

3/16" socket or nutdriver

To avoid electrical shock or property damage, disconnect power before installing or servicing equipment. A qualified technician must perform the service procedures.

  1. Remove module top.

  2. Label and pull the wire connectors from the microswitch.

  3. Using a 3/16" socket or nutdriver, remove the nuts securing the microswitch and pull microswitch from unit.

  4. Install new microswitch in reverse order.

Related Content

Replacing the Air Temperature Probe

Replacing the Transformer

Replacing the Food Probe Receptacle

Replacing the Cooling Fan

Replacing the Air Heater High Limit

Replacing the Blower Motor

Replacing the Air Heater

Replacing the Vent Motor

Replacing the Power Switch

Replacing the Fuse and Fuse Holder

Replacing the Relay

HHC 99X Troubleshooting the E-5 Air Temp Sensor Failed Error Code

HHC 99X Troubleshooting the E-80 Vent Stuck or Bad Switch Error Code

Reference

Error Codes

Specifications

HHC 99X Wiring Diagrams