Replacing the Burner Tubes

To avoid electrical shock or property damage, move the power switch to OFF and disconnect power.

Removing

1. Remove electrical power supplied to the unit.

2. Lower the control board.

   

3. Using a 5/16 inch socket, remove the two screws that secure the burner support bar to the burner assembly.

4. Remove the support bar.

   

5. Pull down on the burner tubes to release them from the orifices. Once the burner tube is cleared from the orifice, pull the tube out of the assembly.

Installing

1. To reassemble the burners, slide each burner tube onto the orifices.

2. Line the notches on the support bar to each tube.

3. Tighten the screws to the assembly.