Applies to:
High Limit Reset
This high temperature limit control is a safety, manual reset control, which senses the temperature of the oil. If the oil temperature exceeds 425° F (218° C), this switch opens and shuts off the heat to the vat. When the temperature of the oil drops to a safe operation limit, the control must be manually reset by pressing the reset button.
A red reset button is located under the control panel, in the front of the gas fryer.
The reset button on electric fryers is located in a hole in the right element hinge. Use a small screwdriver to press the reset button.
Once the reset button is pressed, heat is then supplied to the vat.
Related Content
Replacing the Heating Contactors (Electric)
Replacing the Heating Elements (Electric)
Replacing the High Temperature Limit Control (Electric)
Replacing the Temperature Probe (Electric)
Replacing the Flame Sensor / Pilot / Ignitor Assembly (Gas)
Replacing the High Temperature Limit Control (Gas Units)
Replacing the Temperature Probe (Gas)
Replacing the Gas Control Valve
Troubleshooting the OFG 34X Fryer Stuck in Ignition Loop
Troubleshooting the OFG 34X E-4 Control Overheating Error Code
Troubleshooting the OFE 34X E-5 Oil Overheating Error Code
Troubleshooting the OFG 34X E-5 Oil Overheating Error Code
Troubleshooting the OFE 34X E-6 Temperature Probe Open Error Code
Troubleshooting the OFG 34X E-6 Temperature Probe Open Error Code
Troubleshooting the OFE 34X E-10 High Limit Error Code
Troubleshooting the OFG 34X E-10 High Limit Error Code
Troubleshooting the OFE 34X E-20A Fan Sensor Stuck Closed Error Code
Troubleshooting the OFG 34X E-20A Fan Sensor Stuck Closed Error Code
Troubleshooting the OFG 34X E-20B Pressure Switch Stuck Open or Blower Failure Error Code
Troubleshooting the OFG 34X E-20D Ignition Failure Error Code
Troubleshooting the OFE 34X E-92 24v Circuit Overload Error Code
Troubleshooting the OFG 34X E-92 24v Circuit Overload Error Code
Reference
