Applies to:

Replacing the Power Switch

To avoid electrical shock or property damage, move the power switch to OFF and disconnect power.

Remove electrical power supplied to the unit.
Remove the control panel.
Label and remove wires from the switch.
With a test instrument check across the terminals of the switch with the switch in the ON position and the circuit should be closed.
In the OFF position, the circuit should be open. If the switch checks defective, replace by continuing with this procedure.
With control panel removed, and the wires off the switch, push in on tabs on the switch to remove form panel.
Replace with new switch.
Reconnect wires to switch.
Replace the control panel.
Unit is ready for operation.