Applies to:
Replacing the Vacuum Switch
|
To avoid electrical shock or property damage, move the power switch to OFF and disconnect power. |
-
Remove electrical power supplied to the unit.
-
Remove the control panel.
-
Remove the 2 screws securing the switch to the heat shield.
-
Remove the air hose form the air switch.
-
Label and remove wires from air switch.
-
Install new vacuum switch.
Related Content
Replacing the Heating Contactors (Electric)
Replacing the Heating Elements (Electric)
Replacing the High Temperature Limit Control (Electric)
Replacing the Temperature Probe (Electric)
Replacing the Flame Sensor / Pilot / Ignitor Assembly (Gas)
Replacing the High Temperature Limit Control (Gas Units)
Replacing the Temperature Probe (Gas)
Replacing the Gas Control Valve
Troubleshooting the OFG 34X Fryer Stuck in Ignition Loop
Reference
