Replacing the Blower Motor
Required tools
crosshead screwdriver
allen wrench
|
To avoid electrical shock or property damage, disconnect power before installing or servicing equipment. A qualified technician must perform the service procedures. |
-
Remove the cross head screws securing the bottom, rear cover and let hinge down.
-
Remove the three screws from the blower bracket and pull blower motor assembly from housing.
-
Using an Allen wrench, loosen the set screw securing the fan blade to the blower motor and pull fan blade from motor
-
Cut wires to blower motor and pull motor from unit.
-
Strip back the cut wires, and connect new blower motor wires to these wires, using wire splicers or wire nuts.
-
Install new blower motor in reverse order.
