Replacing the Meat Probe Receptacle
Required tools
crosshead screwdriver
3/8" socket
Required parts
meat probe receptacle
|
To avoid electrical shock or property damage, disconnect power before installing or servicing equipment. A qualified technician must perform the service procedures. |
-
Remove electrical power to unit.
-
Using crosshead screwdriver, remove the side panel closest to the controls.
-
Using a 3/8" socket remove the keps nuts from receptacle bracket and remove bracket from unit.
-
Unplug the 2-pin connector from the P-5 receptacle on the control board.
-
Using a small crosshead screwdriver, remove the screw securing the probe receptacle to the bracket.
-
Replace with new receptacle in reverse order of previous steps.
-
Replace side panels and restore power to unit.
