SCR 3 Side Panel Support Kit
Estimated Time
15 to 30 Minutes
|
To avoid electrical shock or property damage, move the power switch to OFF and disconnect power. |
- Remove electrical power to the unit.
- Remove the control side, side panel.
- Remove the three screws to the left of the blower motor.
- Set the bracket in place.
- Secure with screws previously removed.
- Replace side panel and restore power to the unit, and unit is now ready for use.
Related Content
Replacing the Drive Motor Capacitor
Replacing the Meat Probe Receptacle
Testing the Relay and Replacing the Drive Motor
Installing the Rotation Switch
SCR Stacking Kit Instructions Short
Rotisserie Stacking Instructions
Troubleshooting a Broken Shaft Adapter Pin
Radiant Heat Deflectors Instructions
Radiant Heat Deflectors Instructions
SCR 6/8 Lamp Guard Installation Instructions
Reference
