Replacing the Halogen Lamp
|
To avoid electrical shock or property damage, move the power switch to OFF and disconnect power. |
|
NOTICE - |
To avoid product damage while reinstalling the new bulb, do not touch light bulb with fingers. Wrap the foam packing around bulb to install the bulb. |
-
Push in and twist bulb counterclockwise to remove defective bulb.
-
Use the foam packing around new bulb, and push new bulb into socket. Twist clockwise to lock into place.
-
Restore power to unit.
Related Content
Replacing the Blower Motor Capacitor
Replacing the Halogen Lamp Socket
Radiant Heat Deflectors Instructions
Radiant Heat Deflectors Instructions
SCR 6/8 Lamp Guard Installation Instructions
Troubleshooting an E-6 Error Code
Troubleshooting the Temperature Inside Not Matching the Control
Converting SCR 6 or 8 between Phases
Reference
