Lowering the Control

To avoid electrical shock or property damage, move the power switch to OFF and disconnect power.

To replace parts inside the fryer, lower the control.

1. Place the main power switch to the off position. The switch labeled "POWER / OFF / PUMP".

2. Remove the two screws form the bottom of the control.

3. Carefully slide the control upward until it lifts off the metal hangers.

4. With the fryer door closed, place the lower edge of the control in the slot between the door and the frame of the fryer.

Raise the Control

1. Raise the control, and then hook it on the metal hangers that hold the top of the control in place.

2. Install the two screws in the bottom of the control.

3. Reconnect power to the fryer.

Replace the Control

1. Note the locations of the connectors on the back of the control.

2. Remove the connectors and swap out the old control for the new.

3. Reconnect the connectors on the back of the control.