Applies to:
ALL CUSTOMERS
Rear Cover Removal Instructions
Required tools
3/8 in. socket or speedwrench
Crosstip head screwdriver
Kit number
Estimated Time
30 Minutes
Models 680, 580, and 590 Rear Cover Removal
-
Use a 3/8 in. socket or speedwrench to remove the 6 keps nuts around exterior of rear cover.
-
Lift up on the rear cover and pull out at the bottom to clear threaded studs.
-
The top shroud can be removed to make it easier to remove the rear cover. Note this is not necessary.
Model 690 Rear Cover Removal
-
Use a crosstip head screwdriver to remove top screw.
-
Loosen the lower screw on each side of the fryer.
-
Lift out on the top of the rear cover and then lift up on it to clear loosened screw.
Related Content
PFE 590 and 591 Installing Optional Crumb Basket
Label Application and Location for the 8 Head Fryer
Electric Power Cord Routing and Attachment Installation Instructions
PFE 590 and 591 Electronic Control Retrofit Computron 7000 to New Electronic Controls
PFE 592 (FAST Controls) to 590 (Henny Penny Controls) Retrofit Instructions
Direct-Connect Retrofit Instructions (For use on fryers after SN: 290-BE0401001 & 591- LG014JC)
Retrofit Control Instructions 290-590 KFC to 291-591 GM
Retrofit 292-592 Fast KFC to 291-591 Controls Instructions
Filter Rinse Hose Retrofit Instructions
FM08-481 8 Head Replacing the Control
FM08-502 8 Head Replacing KFC Control
Installing Optional Crumb Basket
PFG 690 Stabilizer Retrofit Instructions
I-Beam Cable Hole Plug Installation
PFG-69X & OFG-39X Gas Valve Replacement Kit
Repositioning/Rewiring Air Valves for 220240V Model 690/390 fryers
Repositioning / Rewiring Air Valves for 120V Model 690/390 fryers
FM07-558 Gas Valve Replacement Kit
PFG-690/691 & OFG-390/391 Pump Motor Relay Kit
Conversion From C8000 Control to KFC SMS Control
Manifold Retrofit Kit Instructions
Replace Nylatron Slides on PFG 690 and 691
PFG 690 and 691 Installing Filter Rinse Hose
PFG 690/691 Ignition Module Kit
Mounting the OFG 390 and PFG 690 Vacuum Switch
Conversion From Standard 690 Control to S/M Control
PFG 690 and 691 Temperature Probe CE Instructions
Replace Gas Valve Assembly with Gas Valve and Solenoid Assembly
Replacing Gas Valve Assembly With Gas Valve and Solenoid Assembly
Air Switch Monitoring Retrofit Kit Instructions
PFG 691 C8000 Retrofit Instructions
PFG 690 and 691 Lid Cable Replacement
Operating Instructions for PFG-691/OFG-391 Direct-Connect Oil System
Direct-Connect Retrofit Instructions (For use on fryers after SN: 391-LH016JC & 691-LH029JC)
CE Gas Valve Adjustment Instructions
Reference
PFE 590 and 592 Inspection and Planned Maintenance
PFE 590 and 592 KFC Annual Inspection Certification
