Applies to:

ALL CUSTOMERS

Unpacking Instructions

Estimated Time

1 Hour

  1. Cut and remove the plastic bands form the main box.

  2. Remove box lid and lift the main box off the fryer.

  3. Remove corner packing supports (4).

  4. Cut the stretch film from around the carrier/rack box and remove it and the packing from the top of the fryer lid.

  5. Cut and remove the metal bands holding the fryer to the pallet. The fryer weights 725 lbs, please use extreme care when moving the fryer.

  6. Remove the fryer from the pallet.

  7. Remove rear cover. TheThe weights for the counterweight are shipped separately under the unit and weigh approximately 18 lbs. (8.1kg.) each. Handle with care or personal injury may result. All segments must be installed before attempting to unlatch the lid.

  8. Load the seven weights into the counterweight assembly.

  9. Replace rear cover.

  10. Cut warning tags form the lid assembly. The lid may not be unlatched.

  11. Remove the accessories from inside the filter pan.

  12. Prepare the deadweight valve for operation as follows:

    1. Unscrew the top cap.

    2. Remove the round weight.

    3. Remove and discard the shipping support.

    4. Clean the orifice with a dry cloth.

    5. Replace the weight and secure the top cap.

  13. Remove the protective paper form the fryer cabinet.

  14. Clean exterior surface with a damp cloth.

Related Content

PFE 590 and 591 Installing Optional Crumb Basket

Rear Cover Removal Instructions

Label Application and Location for the 8 Head Fryer

Installing the Pump Seal Kit

Electric Power Cord Routing and Attachment Installation Instructions

PFE 590 and 591 Electronic Control Retrofit Computron 7000 to New Electronic Controls

PFE 592 (FAST Controls) to 590 (Henny Penny Controls) Retrofit Instructions

Direct-Connect Retrofit Instructions (For use on fryers after SN: 290-BE0401001 & 591- LG014JC)

Retrofit Control Instructions 290-590 KFC to 291-591 GM

Retrofit 292-592 Fast KFC to 291-591 Controls Instructions

Filter Rinse Hose Retrofit Instructions

FM08-481 8 Head Replacing the Control

FM08-502 8 Head Replacing KFC Control

Replacing the Casters

PFG 690 to 692 Retrofit Kit

Installing Optional Crumb Basket

PFG 690 Stabilizer Retrofit Instructions

I-Beam Cable Hole Plug Installation

8 Head Baso Retrofit Kit

PFG-69X & OFG-39X Gas Valve Replacement Kit

Repositioning/Rewiring Air Valves for 220240V Model 690/390 fryers

Repositioning / Rewiring Air Valves for 120V Model 690/390 fryers

FM07-558 Gas Valve Replacement Kit

PFG-690/691 & OFG-390/391 Pump Motor Relay Kit

Pan Spacer Bracket

Ignition Module Retrofit Kits

Conversion From C8000 Control to KFC SMS Control

Manifold Retrofit Kit Instructions

Replace Nylatron Slides on PFG 690 and 691

PFG 690 and 691 Installing Filter Rinse Hose

PFG 690/691 Ignition Module Kit

Mounting the OFG 390 and PFG 690 Vacuum Switch

Conversion From Standard 690 Control to S/M Control

PFG 690 and 691 Temperature Probe CE Instructions

Replace Gas Valve Assembly with Gas Valve and Solenoid Assembly

Replacing Gas Valve Assembly With Gas Valve and Solenoid Assembly

Air Switch Monitoring Retrofit Kit Instructions

PFG 691 C8000 Retrofit Instructions

PFG 690 and 691 Lid Cable Replacement

Operating Instructions for PFG-691/OFG-391 Direct-Connect Oil System

Direct-Connect Retrofit Instructions (For use on fryers after SN: 391-LH016JC & 691-LH029JC)

CE Gas Valve Adjustment Instructions

Replacing the Casters

PFG 691 Attaching the Rinse Hose Instructions

Reference

Specifications

Error Codes

Wiring Diagrams

PFE 590 and 592 Inspection and Planned Maintenance

PFE 590 and 592 KFC Annual Inspection Certification

Specifications

PFE 591 Inspection and Planned Maintenance

PFG 690 and 692 Inspection and Planned Maintenance

Error Codes

PFG 690 Wiring Diagrams

Specifications

PFG 690 and 692 KFC Annual Inspection Certification

Specifications

Error Codes

PFG 691 Wiring Diagrams

PFG 691 Inspection and Planned Maintenance