Overview
Can the seal between the metal door frame and the glass be repaired?
Procedure
To activate the grease collection system while cooking:
-
Access the Service /Settings Menu with code 1967.
-
Go to Parameters setting.
-
Parameter 083 for Grease Collection and select "Read".
-
Change the setting from 0 to 1 and then select "Write".
-
After writing the setting, power cycle the unit.
In Manual Cooking mode, the option for Grease Collection should be below fan speed. This setting can only be used in Combi or Convection modes.
Concept Information
Related Content
Replacing the Hose Reel for Hand Shower on SmartCombis and ClassicCombis
FlexFusion Platinum Combiovens
Troubleshooting the SPU Display
Troubleshooting a Blank Display on FlexFusion Team Combi Ovens
Unlocking and Deactivating the Lock Screen on FPE and FPG Combi Ovens
Repairing the CombiOven Door Seal
Troubleshooting FPE CombiOven Without Heat, Error Message, or Voltage
FlexFusion Platinum 701 / 702 Fan Defective Error Message
Changing a Standard Six or Ten Grid Gas Unit into a Stacked, Bottom Unit
FlexFusion Space$aver Combiovens
Replacing the FSE Liquid Cleaning Pump with New Style
Creating the Cookie and Breakfast Bars Recipe for Wendy's Flexfusion SpaceSaver Combi Ovens
Replacing the Flexfusion Space$aver Plus and Team Blower Shaft Seal and Lock Washer
Troubleshooting the Wendy's Flexfusion SpaceSaver Liquid Cleaner Pump Failure
Reference
CombiOven Water Quality Specifications
Replacing the Drain Heat Exchanger on SmartCombis and ClassicCombis
Smart / Classic Combi Component Ohm Values
FlexFusion Platinum Electric G1 Combiovens
FlexFusion Platinum Electric G2 Combiovens
FlexFusion Platinum Gas G1 Combiovens
FlexFusion Platinum Gas G2 Combiovens
Flexfusion Platinum Gas 221 CombiOven
FlexFusion Platinum Team Combiovens
FlexFusion Platinum Team G2 Combiovens
CombiOven Service Video Archive
FlexFusion Space$aver and Space$aver Plus Combiovens
FlexFusion Space$aver and Space$aver Plus G2 Combiovens
