Applies to:
Filter Pan Dolly Assembly
Required tools
Crosstip screwdriver
Kit number
03389
03390
03391
03392
Estimated Time
30 Minutes
-
Attach the casters to the dolly base. Use hardware provided in the kit.
-
Place washers under screw heads.
-
Place L-shaped handle brackets under the screw heads on either end of the dolly. Ensure the "L" part of the bracket is towards the outside of they dolly.
-
Attach the handle of the dolly by placing the ends of the handle in the holes in the brackets. Ensure proper placement of the handles or they may interfere with drain handle on unit.
Related Content
Replacing The Filter Rinse Hose
Preventing Filter Pump Problems
Direct connect oil system operating instructions
Troubleshooting an E-92 Error Code
Electronic C2000 Simple Control Retrofit Kit
4 Head PFE 500/ PFG 600 Removing the Lid
RLink programming instructions
Pressure Assist Kit Installation
PFE 500/PFG 600 Wi-Fi Verification and Troubleshooting Instructions
PFE 500/PFG 600 Hybrid Control Installation Instructions
FAST Control Installation Instructions
2nd Generation Radio for SMS: Hardware Installation
2nd Generation Radio for SMS: Software Update
FM08-748 2nd Generation Radio for SMS: Troubleshooting
Instructions for Fryer Control Replacement Kits
SMS 20 Auto Polish Programming Instructions
Temperature Probe Gauge Instructions
PFG 600 Preventing Filter Pump Problems
Replacing the Filter Rinse Hose
SAE Thread Filter Pump Installation
Pre VA SAE Thread Filter Pump Installation
Installation of PFG 600 and PFG 600 SSI FM07-366 Electromechanical to C1000 Retrofit
PFG 600 SSI Electronic C1000 to C8000 Retrofit Kit
Direct connect retrofit PFG 600
Direct connect retrofit PFG-600
PFG 600 Ignition Module Retrofit Kit
PFG 600 SSI Fryers Gas Valve Replacement Kit
Hybrid Control and Wi-Fi Installation
Reference
PFE 500 and 561 Inspection and Planned Maintenance
PFE 500 KFC Annual Inspection Certification
