Applies to:
C2000 Operating instructions
Kit number
14958
14959
Estimated Time
15 minutes
-
To enter Special Programming, turn off the power switch. Press and hold "P" and turn the power switch back on.
-
"SPEC", "PROG" followed" by "DEG", "F" or "C" displays. Use the start/stop button to change to "F" or "C" and vice versa.
-
Press "P" 3 times and "FRYR" will show in display. Use the up and down arrows to change the fryer type.
-
"ELEC" for electric models.
-
"GAS" for units with standing pilot.
-
"SSI" For units with solid state ignition.
-
"IDG" for units with induced draft gas burners; (units with burner tubes).
-
-
Press and hold "P" to exit special programming at any time.
Related Content
Direct connect oil system operating instructions
Electronic C2000 Simple Control Retrofit Kit
4 Head PFE 500/ PFG 600 Removing the Lid
RLink programming instructions
Pressure Assist Kit Installation
PFE 500/PFG 600 Wi-Fi Verification and Troubleshooting Instructions
PFE 500/PFG 600 Hybrid Control Installation Instructions
FAST Control Installation Instructions
2nd Generation Radio for SMS: Hardware Installation
2nd Generation Radio for SMS: Software Update
FM08-748 2nd Generation Radio for SMS: Troubleshooting
Instructions for Fryer Control Replacement Kits
SMS 20 Auto Polish Programming Instructions
Temperature Probe Gauge Instructions
Replacing the Indicator Lights
Replacing the Main Power Switch
Installation of PFG 600 and PFG 600 SSI FM07-366 Electromechanical to C1000 Retrofit
PFG 600 SSI Electronic C1000 to C8000 Retrofit Kit
Hybrid Control and Wi-Fi Installation
Troubleshooting the SMS 20 Control Countdown
Direct connect retrofit PFG 600
Direct connect retrofit PFG-600
PFG 600 Ignition Module Retrofit Kit
PFG 600 SSI Fryers Gas Valve Replacement Kit
SAE Thread Filter Pump Installation
Pre VA SAE Thread Filter Pump Installation
Reference
PFE 500 and 561 Inspection and Planned Maintenance
PFE 500 KFC Annual Inspection Certification
