Applies to:
ALL CUSTOMERS
I-Beam Cable Hole Plug Installation
Required tools
Flat-head screwdriver
Kit number
140501
Estimated Time
30 Minutes
|
To avoid electrical shock or property damage, move the power switch to OFF and disconnect power. |
This kit is only to be used in cases where the lid cables are installed in the correct holes and also pass inspection.
-
Disconnect power
-
Lower and lock lid.
-
Remove rear cover.
-
Using a flat-blade screw driver, insert plugs into rear holes.
Related Content
Replacing the Lid Counterweight Cables
Calibrating and Cleaning the Pressure Gauge
Replace Nylatron Slides on PFG 690 and 691
PFG 690 and 691 Lid Cable Replacement
FM08-502 8 Head Replacing KFC Control
FM08-481 8 Head Replacing the Control
Label Application and Location for the 8 Head Fryer
PFG-69X & OFG-39X Gas Valve Replacement Kit
Repositioning/Rewiring Air Valves for 220240V Model 690/390 fryers
Repositioning / Rewiring Air Valves for 120V Model 690/390 fryers
FM07-558 Gas Valve Replacement Kit
PFG-690/691 & OFG-390/391 Pump Motor Relay Kit
Conversion From C8000 Control to KFC SMS Control
Rear Cover Removal Instructions
Manifold Retrofit Kit Instructions
Installing Optional Crumb Basket
PFG 690 and 691 Installing Filter Rinse Hose
PFG 690 Stabilizer Retrofit Instructions
PFG 690/691 Ignition Module Kit
Mounting the OFG 390 and PFG 690 Vacuum Switch
Conversion From Standard 690 Control to S/M Control
PFG 690 and 691 Temperature Probe CE Instructions
Replace Gas Valve Assembly with Gas Valve and Solenoid Assembly
Replacing Gas Valve Assembly With Gas Valve and Solenoid Assembly
Air Switch Monitoring Retrofit Kit Instructions
PFG 691 C8000 Retrofit Instructions
Operating Instructions for PFG-691/OFG-391 Direct-Connect Oil System
Direct-Connect Retrofit Instructions (For use on fryers after SN: 391-LH016JC & 691-LH029JC)
CE Gas Valve Adjustment Instructions
Replacing the Lid Counterweight Cables
Calibrating and Cleaning the Pressure Gauge
PFG 691 Attaching the Rinse Hose Instructions
Reference
PFG 690 and 692 Inspection and Planned Maintenance
