Replace Gas Valve Assembly with Gas Valve and Solenoid Assembly

To avoid electrical shock or property damage, move the power switch to OFF and disconnect power.

Removal

1. Disconnect power and turn main gas off.

2. Disconnect 3 wires from gas valve terminals M, C & P

3. Disconnect pilot tube from gas valve.

4. Disconnect main gas tube from gas valve.

5. Disconnect and remove aluminum burner supply tubes

6. Remove 2 mounting screws and 2 spacers from gas valve mounting.

7. Remove gas valve assembly.

8. Remove gas valve from plumbing assembly.

9. Remove all 4 burners, and discard.

Replacement

1. Install 4 new burners.

2. Add gas valve to new plumbing / solenoid assembly (use pipe dope on pipe threads).

3. Insert gas valve / solenoid assembly. into fryer and align two mounting holes.

4. Secure gas valve / solenoid assembly to mounting bracket by using 2 screws and two spacers.

5. Re-connect main gas line to gas valve.

6. Re-connect 3 wires to gas valve terminals M, C & P.

7. Route two wires from solenoid through grommet to gas valve terminals M & C.

8. Re-connect pilot tube to gas valve.

9. Bend new supply tubes from ‘T’ to each burner using 2 tubes provided.